Once you have received the keys of your new Jeep Wrangler, you must get a license plate before you can take it for a ride. And who says your vehicle’s license plates have to be boring? You can always opt for the cool ones that are noticeable and quirky.
Even if you have a license plate that you want to install in your Jeep Wrangler, chances are you don’t know how. And to help you out, in the section below, we’ve listed how to put a license plate on a Jeep Wrangler. Read on to learn more!
1. Make Sure the Bumper Is Suitable
The first and most important step is to determine whether or not the Jeep Wrangler’s bumper is appropriate. There are many bumper types that you can buy for your Jeep Wrangler and replace them in case your bumper has some sort of defect.
This is because you do not want to put that new license plate on a very faulty Jeep Wrangler bumper and call it a day, as it does not look visually appealing. You might see the bumper and the license plate falling off.
2. Gather Materials for Putting It
Now, to complete this project, you will need tools and might have to get your hands dirty. To begin, you’ll need a drill with an 18-inch drill bit designed for this purpose.
After that, you will need some screws to hold the license plate, and you can always find them in the nearest shop close to your house’s location or even order them online. And lastly, you will need the vanity or license plate for the work itself.
Along with that, you will need a Phillips-head screwdriver to put the screws into the holes of the license plate and attach it to your Jeep Wrangler. You should also have at least three to four screwdrivers and some extras in case of an issue, and you need to be prepared.
If you are looking for ways to drill a license plate into your Jeep Wrangler but need clarification about what license plate or vanity plate to put in that amazing Jeep, you can also look into Jeep front license plate ideas to learn more.
3. Installation Process of The License Plate
Now, we suggest you focus on the bumper itself. You will see that your bumper should have small holes or little laces to which you can screw your screws. It works for any Jeep Wrangler because most Jeep Wranglers have tiny, visible holes in the bumper.
After you find the small holes in the bumper, try to place the license plate on top of the bumper to see how it would fit. This entirely depends on your common sense and how fitting it looks to your eyes. Try to match the license plate hole numbers and size to the ones in the bumper to effectively put the license plate on the bumper of the Jeep Wrangler.
There should be approximately four hotels in the bumper of the Jeep Wrangler and four holes in the license plate, and positioning them should be easy.
Following that, you must take the following critical steps:
- Drill a hole in the Jeep Wrangler’s bumper holes so that you can put the screws through both the holes of the license plate and the tat of the car’s bumper, and to do that, make sure you are extra safe and wear safety goggles or take help if you are not someone who has done it before.
- Definitely drill the holes in the Jeep Wrangler’s bumper one at a time to ensure that the holes are drilled properly.
- After drilling, use the Phillips screwdriver to ensure that you position the license plate correctly, then begin inserting screws into the holes with the screwdriver.
- You must ensure that the screw is entering both the holes of the license plate and those of the Jeep Wrangler, as this will ensure the license plate is fitting.
- Put the screw through the license plate and the Jeep Wrangler’s bumper one at a time to ensure all the screws fit properly, and none loosened.
- Be very careful when doing this, and ensure you have the necessary safety tools too.
After completing the necessary steps, you can now take a step back to see if the vanity plate or license plate was properly positioned and share its picture on social media and other platforms to show your friends and family.
If you have no idea where to get a license plate, you can always go for 3D license plate printing, which is one way to get your custom license plate and take inspiration from various license plates.
Other Mounting Options of Front License Plate For Your Jeep Wrangler
While mounting or putting a front license plate on a Jeep Wrangler can be done the old-fashioned way with some screws and drilling holes, there are other remarkable methods via which you can actually attach or mount your license plate to your Jeep Wrangler in more creative and efficient ways.
From magnetic ways to adhesive ways, read this section below to get a peek at what other ways you can put your front license plate on a Jeep Wrangler.
1. Torque Eye Method to Attach Front License Plate
On the front bumper cover of high-end and sporty vehicles including a Jeep Wrangler, there is frequently a little access panel leading to a big threaded socket.
This is mainly done to get the car onto a flatbed tow truck by threading a towing eye through it. However, you can utilize it to put a unique license plate on the front!
2. Magnetic Way to Attach Front License Plate
Imagine not having to drill holes into the Jeep Wrangler to attach the license plate late in the vehicle’s bumper, but instead having a cool method involving some physics, or in other words, magnets!
Even if they are not intended for the type of license plate attachment you want, you can still definitely go this route to have your front license plate attached to the Jeep Wrangler.
However, you should not be swayed by their coolness and go overboard. These are only ad hoc mounts for test drives and auto dealers.
But even if one were to take a chance with this one, you would still need to locate some sort of metal type on the car’s front bumper so that the license plate would automatically attach to the bumper of the Jeep Wrangler, as the bumper is primarily made of plastic. This may need some additional work, but it is an option worth going for.
3. Adhesive Front License Plates
The ability to purchase a novelty plate manufactured on a solid adhesive material that can be attached to any smooth area of your car’s front side is an intriguing trick and something you can go for. Consider the convenience of not having to drill holes.
Simple adhesive is attached on one end to the license plate, which can be attached to the other end of the front side of the Jeep Wrangler.
Why Front Plates Are Frequently Required?
One of the main reasons a front license plate is needed is because of the laws within a country, which are often enforced by police, with meter readers observing every vehicle on the road, including Jeep Wranglers.
Hence you must have a front license plate on your Jeep Wrangler. Not only that, but with the help of front license plates, it is easier to trace down any vehicle in case it is stolen or taken away.
Conclusion
Overall, we outlined how to put a front license plate on a Jeep Wrangler, and we hope that it has helped you put the license plate on your Jeep Wrangler easier and aided you!